Jennychem Sodium Hypochlorite (10%)

Description

Sodium Hypochlorite 10% is a powerful disinfectant and cleaning solution used for cleaning patios, driveways, exterior walls, and for light chlorination tasks such as swimming pool maintenance. It is slightly less concentrated than the 14–15% version, making it easier to handle for general domestic and commercial use.

It can be safely used on concrete, stone, brick, tarmac, and block-paved patios, as well as rendered and brick walls. Avoid using it on metals, painted surfaces, or delicate natural stone (e.g. limestone) without testing a small area first.

10% Sodium Hypochlorite is commonly used for swimming pool chlorination. Always follow pool dosing guidelines or consult a pool professional to calculate the correct amount for safe and effective use.

For patio and driveway cleaning: dilute 1 part product with 5 to 10 parts water depending on the level of dirt or algae. For pool use: dosage depends on the volume of water and desired chlorine level—refer to pool care guidelines.

It is suitable for most outdoor hard surfaces, but should not be used on untreated metals, certain natural stones, or painted finishes without testing. Always rinse treated areas thoroughly after application.

Always wear gloves and eye protection. Use in a ventilated area and avoid mixing with other chemicals. Do not allow runoff into storm drains or garden beds. Keep out of reach of children and pets.

Store tightly sealed in its original container, in a cool, dry, and well-ventilated area away from sunlight and incompatible substances like acids or ammonia.

Sodium Hypochlorite degrades over time, especially when exposed to heat or light. For best performance, use within 3 to 6 months and store in optimal conditions to retain active chlorine content.

1. Pour the product into an garden sprayer or watering can, then mix the product with water at the appropriate ratio for the surface.
2. Apply evenly across the surface, ensuring full coverage of stained areas. Avoid overspray onto plants, grass or nearby metal fixtures.
3. Agitate the area and allow the solution to dwell for 10-15 minutes to break down organic growth. Do not allow the product to dry.
4. Rinse the surface thoroughly with clean water or use a pressure washer for enhanced results, removing loosened tough spots.
5. Allow the patio to dry fully and inspect the surface area. Repeat the process on any heavily affected areas if necessary.